The nozzle is a key part of the photo machine, many photo machine users have encountered the problem that the photo machine nozzle does not work normally, causing the reasons for the photo machine does not work in all aspects, the photo machine nozzle is a precision part, and the printing accuracy of the Audley photo machine can reach14401dpi The extremely fine nozzle ensures the accuracy of the printing screen, and it is also easy to cause the nozzle to not work normally due to improper maintenance, bad ink, static interference and other reasons. Here specifically introduce the common reasons that affect the normal work of the photo machine nozzle, and understand these knowledge related to the nozzle, which is of great benefit to the use of the photo machine in your daily maintenance work.
1. Electrostatic interference
Too dry working environment, will directly produce a lot of static electricity, directly cause ink head circuit damage; Or in the use of printing materials, especially in the use of plastic-based materials, such asPPWhen the adhesive medium is backed, a large amount of static electricity will also be generated; Damage the ink head or cause the accumulation of impurities resulting in ink head blockage damage.
2. There is air in the pipe
Often because the contact point between the pipe and the ink head is loose or the ink head leaks, the ink backflows to the left ink supply bin, resulting in empty burning damage to the ink head of the photo machine. If there are bubbles in the process of filling the ink, the general burn will cause a short circuit, resulting in the failure of the entire group of holes.
3. External voltage
The external voltage is too high or unstable, which has a great impact on the print head of the photo machine, and may cause the machine to burn out the print head or not recognize the print head.
The ink contains a variety of chemical components, often due to the filter is not fine, the viscosity is too high, the moisturizer is not up to standard and other factors, resulting in the failure of the print head.
5.Inattentive to operation and maintenance
towardsEpsonThe direct cause of its damage is physical damage, that is, due to the warping of paper and other media, the metal hole at the bottom of the print head is scratched during the printing process, resulting in damage to the spray hole of the print head of the photo machine, and the normal injection is not possible. The cleaning box on the right side of the photo machine should be often taken down and cleaned with pure water to prevent too much ink accumulation causing ink head blockage. Too much ink at the bottom of the ink head will also block the print spray hole, which should be removed and cleaned with warm water.
The head of Audley photo machine adopts Epson nozzle technology, which has a longer service life, more stable performance and fine nozzle, which can ensure the exquisite effect of the print picture of the photo machine. The nozzle of the photo machine is very important, so we should pay attention to the maintenance of the photo machine nozzle, and this work can extend the service life of the photo machine nozzle and improve the printing effect. Audley photo machine here to remind the majority of photo machine users, we must know more about the knowledge of the photo machine, which is conducive to daily operation and maintenance, photo machine maintenance also has skills and precautions, in the future will continue to introduce for you.
Henan Yindu has made far-reaching breakthrough innovations in the development of digital printing technology. Audley Digital to lead the healthy and rapid development of China's advertising equipment industry, contributed a new concept, the transformation to the pace of multi-nozzle industrial printing equipment, create value for more customers, do China's wide format printer"Toyota" never stops. Single-minded service customers, truly create value for customers, let every machine become your "free" salesman!
If you have any questions, you can leave a comment below or call Audley's helpline:400-6179998
High speed sprinkler :I3200 high speed sprinkler, compatibility: weak solvent, water, thermal sublimation, UV Dual-head configuration: true high-speed printing, 75 square per hour; Control system: the most stable domestic board control system; Silent linear guide: imported silent linear guide, more stable machine movement 1 longer service life; Anti-scratch device: prevent the material from lifting the scratch nozzle, effectively protect the nozzle; Intelligent heating: Dual infrared heating: reduce drying time, speed up paper delivery efficiency, ensure high-speed printing; New frame design: mold appearance new aluminum alloy body structure design, effectively improve the picture printing quality; The height of the trolley frame adjustment: according to the thickness of the material, adjust the height of the nozzle, convenient for users to use more media; Silent linear guide: imported silent linear guide, more stable machine movement, longer service life;
1.With Epsoni3200-A1/E1Original authentic sprinkler head 2.Imported silent linear guide rail: no noise, more stable movement, more stable printing, extend the service life of the machine. 3.All aluminum lifting ink stack: automatic lifting ink stack, tighter sealing and long-term moisturizing, automatic cleaning Settings, cleaner and simpler printing. 4.German Igus chain, the movement is silent more stable. 5.Three speed adjustable press wheel, prevent static electricity does not fly ink, printing size is more accurate, no wrinkles.
With Epsoni3200-U1Nozzle, four-head configuration, high precision mode can be reached32㎡/h, production mode48㎡/h. Platform three zones adjustable suction, high power water coolingUVLights. Head automatic height measurement, anti-collision protection, nozzle independent constant temperature system. Heavy-duty pneumatic expansion shaft, rolling simple discharge system, large bearing weight, long service life, uniform retracting and discharging materials.