Your location: HOME > News center > Do you not know the daily maintenance of digital printing machine in summer?
font: Big Middle Small

Do you not know the daily maintenance of digital printing machine in summer?

Released Date: May 27,2022 Article Source: smyhjx

Now the weather is getting hotter and hotter, the temperature is getting higher and higher day by day, in such weather, do you know how to do wellDigital printing machineThe maintenance ?

Digital printing machine There are certain requirements for the temperature and humidity of the production environment. If it is in a high temperature or humid environment for a long time, some accessories inside the digital printing machine will be damaged, and it will also have a great impact on the printing quality of the product. In addition, in summer, not only the temperature is high but also it often rains, the climate is relatively humid, often working in such an environment, if you do not pay attention to daily maintenance, the machine is prone to failure.

Therefore, in the summer, we must do a good job of maintenance for the digital printing machine.


Daily maintenance of digital printing machine

AudleyThe indoor temperature of the digital printing machine is 15 °-30° Between, at every turn35In high temperature environments, it is necessary to cool down with a fan or air conditioner. In this way, not only the life of the digital printing machine is good, but also the quality of the product is guaranteed.

Be sure to pay attention to the daily dust treatment of the machine to ensure that the production environment is clean and clean, if the air is filled with a large number of particles or dust during the production process will directly affect the printing quality of the equipment.

Drying is not necessarily high temperature, but high temperature will generally appear dry, so during the summer high temperature, we must pay attention to anti-static, anti-dry ink. At this time, you can often sprinkle water on the ground to help prevent the indoor air from being too dry, and at the same time give the printing machine grounding wire to prevent static electricity.

When the summer is rainy, the wet weather will affect the normal use of the digital printing machine, it is recommended to use a dehumidifier to dehumidify. At the same time, the shell of the main body of the digital printing machine should be covered to avoid the invasion of humid air on the related circuit board and components.

Under high temperature environment, do not connect too many devices on a strip, and digital printing machines and computers can be specially equipped with a strip. Other electrical appliances such as chargers, fans, air conditioners, etc., need to be equipped with another strip, do not mix a strip with the digital printing machine.

In order to ensure the stable and continuous operation of the digital printing machine in the summer, we must strictly pay attention to the control of indoor temperature and humidity. Temperature and humidity can not be determined according to their own feelings, so in order to get accurate data, it is best to place a thermometer and hygrometer in the room for convenient viewing and timely adjustment.

Summer in the south is not only hot, but also rainy. If the humidity is too large, it will affect the drying speed of the picture. In order to avoid the adhesion of the printing ink when the winding is not dry, it is recommended to equip the extraction fan in the processing workshop of the digital printing machine if conditions exist, and install air conditioning to start the dehumidification mode, but the effect is more general. If the moisture is serious, it is recommended to install a dehumidifier.

Note on and off:

Check whether the relevant data is normal before starting up every day:

1. Air pressure check: Check that the air pump pressure is normal.

2. Check the printing platform: keep the printing platform free of foreign bodies to avoid rubbing and damaging the nozzle.

3Waste ink barrel inspection: Check the liquid level of the waste ink barrel to prevent the waste ink barrel from overflowing during cleaning.

4Ink check: Ensure that the ink cartridge is sufficient to avoid the nozzle being empty, resulting in damage and blockage of the nozzle.

5Scraping inspection: The cleaning mechanism should be kept clean and clean, and the scraping blade should be kept clean and without damage to avoid affecting the scraping effect
Daily sprinkler status check:

1Check the status of the sprinkler head before printing: print the status diagram of the sprinkler head to confirm that the effect of the sprinkler head reaches the best state, if not, it is necessary to perform cleaning operation to achieve the best effect of the sprinkler head state.

2Check the status of the sprinkler head before shutdown: print the status diagram of the sprinkler head to confirm that the effect of the sprinkler head reaches the best state, if not, you need to perform cleaning operations.

Check related accessories after shutdown:

1Check whether the nozzle is returned to the head to prevent long-term bare leakage of the nozzle, causing damage to the nozzle.

2Check to make sure the dryer is turned off and cut off the power supply.


Digital printing machine is a kind of damp printing equipment, is also the most important accessories of digital printing products, therefore, do the above protective measures in the humid air, can avoid the digital printing machine damaged by moisture, so as to improve production efficiency. Not only that, do scientific maintenance, maintenance can also protect the digital printing machine nozzle and other components, so that your digital printing machine life has been extended, improve printing quality, reduce production costs.

Want to know moreDigital printing machineEquipment maintenance knowledge, you can call:400-6179998

Audley digital printing machine, Indu digital is willing to work with you to create a better tomorrow!


Recommend products

ADL7192 double head photo machine

ADL7192 double head photo machine

High speed sprinkler :I3200 high speed sprinkler, compatibility: weak solvent, water, thermal sublimation, UV Dual-head configuration: true high-speed printing, 75 square per hour; Control system: the most stable domestic board control system; Silent linear guide: imported silent linear guide, more stable machine movement 1 longer service life; Anti-scratch device: prevent the material from lifting the scratch nozzle, effectively protect the nozzle; Intelligent heating: Dual infrared heating: reduce drying time, speed up paper delivery efficiency, ensure high-speed printing; New frame design: mold appearance new aluminum alloy body structure design, effectively improve the picture printing quality; The height of the trolley frame adjustment: according to the thickness of the material, adjust the height of the nozzle, convenient for users to use more media; Silent linear guide: imported silent linear guide, more stable machine movement, longer service life;

Audley ADL-8194 four head industrial piezoelectric photo machine

Audley ADL-8194 four head industrial piezoelectric photo machine

1.With Epsoni3200-A1/E1Original authentic sprinkler head 2.Imported silent linear guide rail: no noise, more stable movement, more stable printing, extend the service life of the machine. 3.All aluminum lifting ink stack: automatic lifting ink stack, tighter sealing and long-term moisturizing, automatic cleaning Settings, cleaner and simpler printing. 4.German Igus chain, the movement is silent more stable. 5.Three speed adjustable press wheel, prevent static electricity does not fly ink, printing size is more accurate, no wrinkles.

M1800W Canvas webbing printer

M1800W Canvas webbing printer

With Epsoni3200-U1Nozzle, four-head configuration, high precision mode can be reached32㎡/h, production mode48㎡/h. Platform three zones adjustable suction, high power water coolingUVLights. Head automatic height measurement, anti-collision protection, nozzle independent constant temperature system. Heavy-duty pneumatic expansion shaft, rolling simple discharge system, large bearing weight, long service life, uniform retracting and discharging materials.

contact us

  • Zhongyuan Printing & Packaging Industrial Park, Pingyuan New District, Xinxiang City, Henan Province, China
  • +86 0373-732 8999